Mar 18 2010
How to improve your home interior with fireplace
With the huge and growing range of fireplaces available today, homeowners are destroyed for choice in the selection of fires for interior living spaces, whether restoring period features or creating a classic style in a modern home. Because of its location in the center of many homes that have been with a pile of their popularity through the ages, and both modern and traditional models of different surfaces, play an increasingly important role in combining cozy warmth with styleAnd the eye appeal.
The installation of a traditional wood fireplace
Most fireplaces wood consists of three components – two legs and a coat hanger. Before starting the installation, you should take the following precautions:
Read the manufacturer's instructions.
FITS not damage the surrounding on a soft surface to surround or your land.
When drilling into the wall, check for hidden pipes or cables to prevent them.
Surround Finish
The decision on the color of a chimney surrounding the games at home is a choice between two processing techniques:
Painting
Stain and varnish
Whatever technique you use, you need the front and rear of the fire surround paint to increase stability.
Rear walls and a fireplace to complete the fireplace
To complete your fireplace, you can reverse laminate back and hearth basket tray suitable for use with mostGas and Electric and widely disseminated through a series of improvements at home and hypermarkets.
Most of the laminate back panels are a combination of a core of kraft paper with heat-resistant resin, which is a decorative laminate surface format used in production. Suitable for microwave dishes shall not contain fuel on board, and a design that promises to 50mm from the edge of the stove and floor plans of at least 300 mm from the source of ignition.
Rear andrequire a cut of opening, in order to use the space on the device. Top Brands laminate can be easily integrated with a fine saw.
There are a number of options for supporting their place, but one of the most effective is to drill a series of small holes where the big panel meets the inside of the leg in the back. These can then be used to surround the screw with a short wood screw, the hole was large a small part of the movement that may occurover time the plant, and to prevent the possibility that the cracks laminate surface.
In general, the oven as a unit to be placed on a bed of sand and cement mortar, so that the focus must be leveled in both directions, it is important that the chimney is also essential to ensure the level and vertical.
Backs alternatives and pensions
Other options for the rear walls and burning wood stove is available on the market, such as cast iron, marble, graniteor marble, in one or three pieces. Already in a similar way, as the back laminate is sufficient, but not require, that surround it, but it is prescribed.
Related posts:
Comments Off